Lancer3D.com

egypt

Egypt

<h2>eSUN PlA+</h2>

<h3>Description</h3>
PLA+ is an environment-friendly material, which is easy to print and has smooth surface.PLA+ filament has good strength, rigidity, toughness balance, strong impact resistance;So pla plus is considered suitable for functional parts printing.eSUN pla+ is approved by FDA, safer to use;PLA pro&nbsp;can be used for&nbsp;modeling, rapid prototyping.
eSUN Pla+ High rigidity, good gloss, and transparency; printing process is non-toxic and tasteless; no curling. Biomaterial extracted from corn grain, naturally degradable and pollution-free for the environment; high rigidity, good gloss, and transparency; printing process is non-toxic and tasteless;
contains&nbsp;additions not seen in standard PLA. The filament's strength is improved by these added additions (at least 2 times tougher than regular PLA). PLA has a stronger proclivity for snapping under pressure, whereas PLA+ has a proclivity for bending. It also results in a smoother finish. PLA+ also does a better job of dealing with bridging and overhangs, requiring less stringing and fewer supports.
Esun Pla+ is our most popular filament since it is so simple to use. You'll need to print at a little higher temperature than conventional PLA to get the best results. PLA+ is especially recommended for larger prints.
<h3>&nbsp;Specifications:</h3>
<ol><li>Dimensional Tolerance +/- 0.03mm</li><li>Tangle Free & No Plugging</li><li>Environmentally Friendly Material</li><li>High Compatibility</li><li>Vacuumed Sealed Packaging</li></ol>

PLA+ is an environment-friendly material, which is easy to print and has smooth surface.PLA+ filament has good strength, rigidity, toughness balance, strong impact resistance;So pla plus is considered suitable for functional parts printing.eSUN pla+ is ap

eSun PLA+ Filament

<h1>1Set Extruder Back Plate + X Motor Front & Back Plate + Z-Axis 2.5mm & 3.0mm Passive Block Plate Kit For CR-10S PRO 3D</h1>
Material: Aluminium Color: Red
Extruder Back Plate Thickness: 2.5mm
- X Motor Front Plate Thickness: 3mm
- X Motor Back Plate Thickness: 2.5mm
- Z-axis 2.5mm Passive Block Plate Thickness: 2.5mm
- Z-axis 3.0mm Passive Block Plate Thickness: 3mm
Package included: 1 x Extruder Back Plate 1 x X Motor Front Plate 1 x X Motor Back Plate 1 x Z-axis 2.5mm Passive Block Plate 1 x Z-axis 3.0mm Passive Block Plate

Material: Aluminium
Color: Red

Extruder Back Plate
Thickness: 2.5mm

CR-10 KIT Sheet Metal

<h2>Description</h2>
<ul><li>Kapton tapes are made from Kapton polyimide film with silicone adhesive. They are compatible with a wide temperature range as low as -269°C (-452°F) and as high as 260°C (500°F). An excellent addition to any 3D Printer's toolbox, this tape helps to keep your bed clean and gives excellent adhesion to prints. The tape is 20mm wide and the roll is 33 metres long</li></ul>

Description
Kapton tapes are made from Kapton polyimide film with silicone adhesive. They are compatible with a wide temperature range as low as -269°C (-452°F) and as high as 260°C (500°F). An excellent addition to any 3D Printer's toolbox, this tape he

Kapton High Temperature Insulation Tape

3-Way End Corner Bracket Connector

Aluminum Profile End Cap

<ul><li>Aluminum profile Y-axis synchronous belt stretching.</li><li>Made of high quality aluminum alloy material, durable to use.</li><li>Surface anodizing treatment, effective protection.</li><li>Easy to operate, simple combination installation and use..</li></ul>

​

Aluminum profile Y-axis synchronous belt stretching.
Made of high quality aluminum alloy material, durable to use.
Surface anodizing treatment, effective protection.
Easy to operate, simple combination installation and use..​

Y Axis Belt Tensioner

<ul><li>turdy SPCC Steel: This belt tensioner is forged with SPCC steel. It has stable shrinkage at high temperatures, beautiful appearance and good wear rate.</li><li>Adjustable Elasticity: It is a very useful upgrade part for series printers. The belt can be adjusted freely, which is better than the original. It is easier to adjust the belt, with higher precise and better printing effect.</li><li>Manual: The belts of the X axes and Y axes can be adjusted by turning the screws by hand at any time.</li><li>Easy Assembly: Already assembled, you don't need to assemble it yourself, just install and use it right away.</li><li>Compatible: 2020 X axes belt tensioner and 2040 Y axes belt tensioner are suitable for Ender 3 V2/ CR‑10/CR‑10S/CR‑10 S4/CR‑10 S5/CR‑10 mini/CR‑10 V2 /CR‑10 V3.</li></ul>

​turdy SPCC Steel: This belt tensioner is forged with SPCC steel. It has stable shrinkage at high temperatures, beautiful appearance and good wear rate.

Aluminum profile Y-axis synchronous belt stretching.
Made of high quality aluminum alloy material,