Dental Smile.

egypt

Egypt

<h5>Features:</h5>
<ul>
<li>Wireless</li>
<li>Light meter attached</li>
<li>Built in fan to avoid over-heat</li>
<li>OLED screen. All angles visible</li>
<li>Especially suitable to solidify agglomerant of orthodontic bracket, veneer and post</li>
</ul>
<h5>Technical Information:</h5>
<ul>
<li>Power voltage: AC100-240 V/50-60Hz</li>
<li>Light power: 1600-1800mW/cm²</li>
<li>Weight: 210g</li>
<li>Dimensions: 195*40*150mm</li>
</ul>

Woodpecker Light Curing LED F

Kandil

&nbsp;Woodpecker Light Curing RTA: 1000-1200 Watt - The Solidification Effect Is Not Affected By The Consumption Of Remaining Power .- Special Light Hood And Holder Design With High Efficiency In Filtering Light. - Ergonomic Design , Small And Convinient.&nbsp;

Woodpecker RTA Curing Light

<h1>LED for all budgets</h1>
Bluephase N MC is a mains-operated LED polymerization light with a light intensity of 800 mW/cm2 and offers outstanding value for money. This curing light focuses on the basic requirements of efficient light-curing procedures and ensures low-maintenance and continuous operation at all times. The economical polymerization light is suitable for light-curing in the wavelength range of 430 – 490 nm.
<h3>Advantages</h3>
<ul>
<li>For all indications due to continuous operation</li>
<li>Simple and uncomplicated handling due to a universal programm and 1-button operation  </li>
<li>Fits the hands comfortably due to an ergnomic design</li>
<li>Rotatable 10-mm light probe for optimal access to all restored areas Indications</li>
<li>Suitable for the polymerization of light-curing dental materials in the wavelength range of 430 - 490 nm</li>
<li>These materials include restoratives, adhesives, bases, liners, fissure sealants, temporaries, as well as luting materials for brackets and indirect restorations, such as ceramic inlays </li>
</ul>

Ivoclar Vivadent Bluephase N MC Wired Lightcure

Bluephase N MC is a mains-operated LED polymerization light with a light intensity of 800 mW/cm2 and offers outstanding value for money.

WOODPECKER i-LED Plus Curing Light from Woodpecker isergonomically designed to fit comfortably in the user’s hand. Using a constant power output this light has a cure time of 1 second for 2mm of resin, with a light intensity of up to 2300mw/ cm?.After the new upgrade, the wave band changes of iLED changes from a single blue light to blue-violet light which can cure all materials.
ADVANTAGES :-
Upgraded light intensity
<ul>
<li>Two modes for option:With the maximum light intensity of 2300mw/cm2,Curing 2mm resin in 1s,Which makes it especially suitable for orthodontic brackets, porcelain veneers and post core adhesives.</li>
</ul>
Upgraded focused light output
<ul>
<li>Unique woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.</li>
</ul>
Upgraded wide spectrum
<ul>
<li>The emission wavelength range of iLED plus wide spectrum, curing light is 385nm-515nm, mainly adding the wave band of 385nm-420nm.the additional band can better curing the resin materials containing new- style photo initiators such as TPO.For example, restoration materials such as Tetric N-ceram bulk fill (Ivoclar) &amp; Amelogen plus (Ultradent).The additional wave band can also reduce the risk of resin shedding and incomplete curing.</li>
</ul>
Features :-
<ul>
<li>Constant power output- born for teeth restoration</li>
<li>360 Degree curing- reach every angle</li>
<li>Fluid design- better hand feeling</li>
<li>1 sec for curing- 2mm resin</li>
<li>Wide spectrum</li>
<li>High light intensity</li>
<li>Focused light</li>
</ul>
TECHNICAL SPECIFICATIONS :-
<ul>
<li>Dimensions: 25mm?25mm?240mm</li>
<li>Net weight: 278g</li>
<li>Power Input: 100V to 240V, 50Hz/60 Hz</li>
<li>Wave length: 385nm-515nm</li>
<li>Light intensity: 1000 mW/cm2~2500mW/cm2</li>
</ul>
PRECAUTIONS :-
<ul>
<li>Please recharge the battery at least 4 hours before first time usage.</li>
<li>In order to prevent cross-infection, it is forbidden to reuse the disposable sleeve.</li>
<li>The top of the main unit can be turned 360 degrees to both left and right while it is forbidden to remove.</li>
<li>During operation, the blue light should be aimed straightly at the composite resin to ensure the effect of solidification.</li>
<li>Avoid aiming the blue light at eyes directly.</li>
<li>Please use the power adapter and lithium battery which is designed and supplied by our company. It may cause potential dangers to operator and patient by using the power adapter and lithium battery which is designed and supplied by other manufacturers.</li>
<li>It is forbidden to use metal or other conductors to touch the main unit and the charging point of pedestal because it may burn the internal circuit or make the lithium battery short circuit.</li>
<li>Please recharge the battery in cool and ventilated room.</li>
<li>It is forbidden to self-taking apart the battery, in order not to result in short-circuit or leakage.</li>
<li>It is forbidden to extrude, shake or rock the battery. The Li-ion battery is forbidden to be in short-circuit situation and it is forbidden to put the</li>
</ul>
MAINTENANCE:-
<ul>
<li>This equipment does not include the self-maintainable spare parts. The maintenance of this equipment should be taken by the appointed professional or special repair shop.</li>
<li>Users can change the disposable sleeve and lithium battery. Please use accessory which is designed and supplied by our company, contract with the local dealer or our company if you want to buy. It may cause potential dangers to curing light or other damages which is designed and supplied by other manufacturers.</li>
<li>The accessory of the product should be cleaned by clean water or neutral sterilized liquid. Do not soak. Do not use highly volatile and diffluent solvent to clean this equipment, which can cause the signs on the control panel to fade.</li>
<li>Please clean the resin remained on the top of the main unit after using to avoid infecting the life-span or solidified effect.</li>
<li>The device cannot be maintanenced during operation. And it is suggested to maintain it once a month. But sleeve is for one-time usage and no need for maintanance.</li>
</ul>
Packaging :-
<ul>
<li>1 x Light cure unit</li>
<li>1 x Charger</li>
<li>1 x Charger cord</li>
<li>1 x Instruction manual&nbsp;</li>
</ul>

Super capacity Li-ion battery, full charge can be used more than 400 times under 10s working time mode. wavelength (420nm~480nm) , 1 second for 2mm in, intensity up to 2300mw/ cm².shop now from DC

Woodpecker Light Cure I Led

to_fixed

Discount

The-Dental-Store-TDS

Features:
<ul>
<li>Smart controlling chip</li>
<li>keeps light output consistent</li>
<li>Light intensity:</li>
<li>1000mw/cm 2 , 1500mw/cm 2 , 2300mw/cm 2</li>
<li>600 mw/cm ²(detect mode)</li>
<li>Wavelength:385-515nm</li>
<li>3 Blue, 1 Violet, 10w LED</li>
<li>360° rotatable head</li>
<li>Intensity digital display</li>
<li>Multiple Curing Options:</li>
<li>   Ramp mode</li>
<li>   Pulse mode</li>
<li>Caries detection</li>
</ul>
Technical parameter: Curing Pen 4 LEDs curing light Dimension: 24*21*230(mm) Net Weight: 109g Lens size: 11mm Power supply: &gt;1200 times, 3 Sec Maximum light intensity

Eighteeth Curing Pen

Woodpecker RTA Light cure s a virtually unbreakable which is sealed against contamination and provide assurance of a complete cure in challenging situations. It has a comfortable ergonomic design with the constant output of light intensity.
FEATURES
<ul>
<li style="margin-left:1.5em;">Wireless</li>
<li style="margin-left:1.5em;">Time setting: 5s, 10s, 15s, 20s</li>
<li style="margin-left:1.5em;">Simple one-button operation</li>
<li style="margin-left:1.5em;">Comfortable ergonomic design</li>
<li style="margin-left:1.5em;">Constant light intensity output</li>
<li style="margin-left:1.5em;">Woodpecker High Quality Manufacture</li>
</ul>

Technical Information:-
<ul>
<li style="margin-left:1.5em;">Net weight: 105g</li>
<li style="margin-left:1.5em;">Dimensions: 230mm×26mm×30mm</li>
<li style="margin-left:1.5em;">Power input: AC100V-240V 50Hz/60Hz</li>
<li style="margin-left:1.5em;">Light output: 1000mW/cm² -1200mW/cm²</li>
<li style="margin-left:1.5em;">Battery: 3.7V/1400mAh</li>
</ul>

Woodpecker RTA Light Cure

TriGroup

Standard specifications:
-Wave length 385~515nm -Power input: 100-240VAC 50Hz/60Hz -Power output: DC 5V/1A -Battery: 2600mAh, can be used over 1300 times under 10 sec mode -Two modes optional: ①Turbo mode: P1: 2300- 2500mW/cm2, 1s, 3s ②Normal mode: P2: 1000- 1200mW/cm2, 5s, 10s, 15s, 20s – Color: Black



Standard specifications:
-Wave length 385~515nm
-Power input: 100-240VAC 50Hz/60Hz
-Power output: DC 5V/1A
-Battery: 2600mAh, can be used over
1300 times under 10 sec mode
-Two modes optional:
①Turbo mode: P1: 2300-
2500mW/cm2, 1s, 3s
②Normal

Maxcure 7 Lightcure

Misr Sinai For Supplies

Technical Data:
<ul>
<li>Adapter：AC100~240V，DC5V/1.5A，50/60Hz</li>
<li>Curing mode:</li>
<li>Wavelength: 380~520nm;</li>
<li>Curing time: 10s, 20s;</li>
<li>Curing depth: 8mm;</li>
<li>Curing range: 10mm;</li>
<li>Light power:≥1100mw/cm²</li>
</ul>
 
Detection mode:
<ul>
<li>Wavelength: 380~420nm</li>
<li>Light intensity: 40~280mw/cm</li>
</ul>
DB686 Nano
●The full metal body;
●Small and exquisite, only 13.5mm outside diameter;
●Indicator light and control key, two in one;
●Head can rotate 360°;
●4 wick, wide spectrum:380-520mm, suitable for most of UV curing resins;
●Independent caries detection LED light core, leaving no place for caries to hide;
●Built-in high sensitive LED metering system;
●10mm wide curing range;
●8mm curing depth；
●Two batteries as standard, a fully charged battery can be used 200 times(10s curing mode)

COXO DB 686 Nano Light Cure and Caries Detector DB Nano

Features:
<ul>
<li>3 seconds for curing: </li>
</ul>
B-cure is equipped with 5w LED.
Maximum light intensity can reach 2000mw/cm2
plays an important role in cementation of all-ceramic restoration and orthodontic bracket
<ul>
<li>Ortho mode: </li>
</ul>
in otho mode, light intensity is automatically set to 2000mw/cm2 
the user can set the single curing time for 3s to 5s and the device will automatically conduct 10 cycles of curing with interval of 1s.
One operation can cement 2 to 3 brackets
<ul>
<li>2 batteries are included and each battery can be charged separetely by putting it on the charger. With two original batteries in hand, continuous power supply is guaranteed.</li>
<li>LED display screen for better visibility</li>
<li>Ergonomic design to be held easily.</li>
</ul>

Woodpecker B-Cure

Features: 1) Three working modes: Low,Soft,High 2) Time setting : 
<ul>
<li>High:1S,2S,3S </li>
<li>Soft:5S,10S,15S,20S </li>
<li>Check:30S,60S</li>
</ul>
3) Constant light intensity. The solidification effect is not affected by the consumption of remaining power. 4) Large capacity battery. A full charge can be used for more than 400 times continuously under 10s working time mode. 5) The check mode is used to detect dental calculus,dental caries and cracked tooth

Technical properties:
<ul>
<li> Rechargeable Lithium battery: </li>
<li>Battery model: ICR18490,Battery capacity: 1400mAh</li>
<li>*Battery has over-voltage, over current and short circuit protection*</li>
<li>Adapter input: AC100~240V 50Hz/60Hz 0.8AMax      Output: DC15V 1.6A </li>
<li> 10W high power blue light LED</li>
<li>Wave length: 385nm~515nm</li>
</ul>

Woodpecker X-Cure

<h1>Woodpecker iLED Max Light Cure</h1>
The woodpecker iLED MAX. More-focused light output.
Upgraded focused light output Unique Woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.
Upgraded light intensity Two modes for options; with the maximum light intensity of 2300mw/cm², curing 2 mm resin in 1s, which makes it especially suitable for orthodontic brackets, porcelain veneers and post-core adhesives.
Upgraded wide spectrum The emissions wavelength range of iLED Max Wide Spectrum Curing Light is 385mm-420nm. The additional band can better curing the resin materials containing new-style photoinitiators such as TPO. For example, restoration materials such as Tetric N-Ceram Bulk Fill (Ivoclar), Amelogen Plus (Ultradent), and ENA Hn(Micerium). The additional wave band can also reduce the risk of resin shedding and incomplete curing.
Using a constant power output this light has two program settings:
<ul>
<li>P1 - Turbo Mode - Light intensity 2300 - 2500 mw/cm2 for 1 - 3 second cures.</li>
<li>P2 - Normal Mode - Light intensity 1000 - 1200mw/cm2 for 5 - 20 second cures.</li>
<li>With the Turbo mode the light has a cure time of 1 second for 2mm of resin, with light intensity of up to 2300mw/ cm²</li>
</ul>
It also features:
<ul>
<li>a 360° fully rotatable head, disposable covers and a rechargeable lithium battery.</li>
<li>Constant Power Output</li>
<li>360° Curing</li>
<li>Fluid Design</li>
<li>1 sec. for Curing</li>
</ul>
Technical specifications:
<ul>
<li>Dimensions: 25mm×25mm×240mm</li>
<li>Net weight: 278g</li>
<li>Power Input: 100V to 240V, 50Hz/60 Hz</li>
<li>Wave length: 385nm-515nm</li>
<li>Light intensity: 1000 mW/cm2~2500mW/cm2</li>
</ul>

Woodpecker iLED Max Light Cure

Sinirgia

<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/1-16.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>Dual wavelength LED</h3>
Usable all kinds of materials in the field with 405nm & 460nm peak wavelength LED.
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/2-10.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>Focused light</h3>
Increase efficiency of light.
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/3-8.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>Autoclaveable and interchangeable Guide-cap</h3>
Guide-cap is autoclaveable and interchangeable to prevent cross infection.
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/4-5.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>4 curing light modes</h3>
User can select High, Low, Softstart, Pulse mode as user wants.
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/5-4.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>Time setting available</h3>
User can select time setting as needs (Softstart is fixed for 20 sec.).
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/6-3.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>330˚head twist and slim head</h3>
It makes easy to get approach into the oral.
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/7-5.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>Angled handpiece design</h3>
Most familiar design for user.
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/8-2.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>OLED-Display</h3>
It shows device states on the OLED screen with clearly.
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/9-2.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>Interchangeable battery pack</h3>
User can interchange the battery easy (Doesn’t need to send device to factory to change the battery).
<img class="flex-shrink-0" src="https://www.gooddrs.de/wp-content/uploads/10-2.png" style="border-style: solid; border-color: rgba(229,231,235,var(--tw-border-opacity)); --tw-border-opacity:1; --tw-shadow:0 0 transparent; --tw-ring-inset:var(--tw-empty, ); --tw-ring-offset-width:0px; --tw-ring-offset-color:#fff; --tw-ring-color:rgba(14,165,233,0.5); --tw-ring-offset-shadow:0 0 transparent; --tw-ring-shadow:0 0 transparent; display: block; flex-shrink: 0;"> 
<h3>Big capacity battery</h3>
Big capacity battery makes long time use.
 
<h2>DETAILS</h2>
<h3>Various curing modes</h3>
Selectable light intensity and time as you want
<img src="https://dentacarts.com/images/abt__ut2/Various-curing-modes-1024x543.png?1645522303434">
<h3>Comparison with Other products</h3>
Produkte (Dr´s Light G & andere Produkte)
<img src="https://dentacarts.com/images/abt__ut2/Comparison-with-Other-products-1-1024x772.png?1645522448496">
<h2>SPECIFICATION</h2>
<ul><li>Model<ul><li>CL-DC20</li></ul></li><li>Handpiece<ul><li>Peak wavelength<ul><li>405nm & 460nm</li></ul></li><li>Light intensity<ul><li>max 1.500 mW/cm²</li></ul></li><li>Dimensions<ul><li>232 x 40 x 26mm</li></ul></li><li>Weight<ul><li>107g (included battery)</li></ul></li></ul></li><li>Charger<ul><li>Dimensions<ul><li>ca. 110 x 105 x 68mm</li></ul></li><li>Weight<ul><li>ca. 100g</li></ul></li></ul></li><li>Battery</li><ul><li>Type<ul><li>Lithium-Ionen-Akku</li></ul></li><li>Nominal voltage<ul><li>3.7V</li></ul></li><li>Weight</li><ul><li>ca. 52g</li></ul></ul></ul>

<h2></h2>