MH Group

egypt

Egypt

* Polysiloxane based,* condensation-curing material for percision impresions , * low consistency * made in Italy
* very hig compressive strengthand recovery from deformation
* adequate total working time
* syringeable and directly applicable on the preparation

Major Ormamax lgiht BODY CS

* Polysiloxane based,* condensation-curing material for percision impresions , * low consistency * made in Italy* very hig compressive strengthand recovery from deformation* adequate total working time* syringeable and directly applicable on the preparation

* Polyvinyl siloxane based,low viscosity , * addition curing material,for percision impression * made in Italy
* fast setting * indicated for the two step putty wash technique * providing a reduced intaroaral setting time 2'30
* thixotropic impression material for putty wash one step and two step

Major Ormaplus LV

* Polyvinyl siloxane based,low viscosity , * addition curing material,for percision impression * made in Italy* fast setting * indicated for the two step putty wash technique * providing a reduced intaroaral setting time 2'30* thixotropic impression material for putty wash one step and two step

<h5>-Pack of:&nbsp;5ml minimix syringe,10 mixing tips</h5><ul style="margin-top:0px;margin-bottom:10px;color:rgb(92,94,98);font-family:Roboto, 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:14px;background-color:rgb(255,255,255);"><li>Optimal adhesion</li><li>Easy removal of the temporary</li><li>No residual cement on the core</li><li>Contains zinc oxide</li><li>Excellent flow</li><li>Eugenol-free</li><li>Easy removal of excess</li></ul>

Harvard TEMP Cem

Eugenol-free temporary luting cement in a minimix syringe

<h5>Properties and advantages:</h5>
<ul><li>Optimal flowable consistency</li><li>Thixotropic</li><li>Excellent high gloss polishability</li><li>Beautiful esthetic restorations</li><li>Low polymerization shrinkage</li><li>Low wear</li><li>Improved mechanical properties</li><li>Cameleon effect <img src="https://dentacarts.com/images/companies/18/A2%20Plakate_Budapest_2017_Seite_4.jpg?1532462336477"> </li></ul>

Harvard Premium+ Flow Plus Compules

<img src="https://dentacarts.com/images/companies/18/A2%20Plakate_Budapest_2017_Seite_4.jpg?1532461251516"> Nano-Optimized Hybrid Composite. For posterior and anterior restorations.<div class="des"></div>

<ul><li>Harvard Self-Bond is a simple to use. 5ml = 8.5g</li><li>self-etching
light curing </li><li>one component adhesive. </li><li>It ensures a strong bonding of composites
to enamel and dentin. <o:p></o:p></li><li>No extra etching necessary</li><li>Only one layer necessary</li><li>Easy application</li><li>Hydrophilic for wet-bonding technique</li></ul>
Indications<o:p></o:p>
Harvard Self-Bond is designed for bonding of light
cure composites to enamel and dentin<o:p></o:p>
 
Application
1. Cavity
preparation
After isolation (best with a rubber dam) prepare the
cavity with minimal tooth reduction. <o:p></o:p>
Margins should have a slight (0.5-1.0 mm) bevel placed
in the enamel to increase the surface area for greater bond strength.<o:p></o:p>
<o:p> </o:p>
2. Pulp
protection<o:p></o:p>
Cavity floor of deep excavations should be covered
with a thin layer of calciumhydroxide material (e.g. Harvard CalciumHydroxide).<o:p></o:p>
<o:p> </o:p>
3. Application of Harvard Self-Bond<o:p></o:p>
Apply Harvard Self-Bond with a brush onto the slightly moist enamel and dentin surfaces for 30 seconds with agitation. <o:p></o:p>
<o:p> </o:p>
The material should build a homogeneous layer. Air
thin gently for 10 seconds to remove the volatile components and to disperse
the adhesive. Then light cure with a suitable dental light unit for 20 seconds
before placement of a composite.<o:p></o:p>
<h6>4. Placement of the restorative<o:p></o:p></h6>
Apply the restorative material according to the
instructions of the manufacturer. <o:p></o:p>
Best results are obtained with application of a thin
layer of a light cure flowable composite (e.g. Harvard RestoreFlow) followed by
the application of a moldable composite (e.g. Harvard Restore) according to the
instructions.<o:p></o:p>
<o:p> </o:p>
5. Warnings<o:p></o:p>
<p class="MsoNormal" style="margin-top:0in;margin-right:.25pt;margin-bottom:0in;
margin-left:.25in;margin-bottom:.0001pt;text-align:justify;text-indent:-.25in;
line-height:normal;mso-list:l2 level1 lfo1;tab-stops:list .25in">· 
Avoid contact with skin, mucous
membrane and eyes.<o:p></o:p>
<p class="MsoNormal" style="margin-top:0in;margin-right:0in;margin-bottom:0in;
margin-left:.25in;margin-bottom:.0001pt;text-align:justify;text-indent:-.25in;
line-height:normal;mso-list:l0 level1 lfo3;tab-stops:list .25in">· 
Unpolymerized Harvard Self-Bond may
have an irritant effect and can lead to sensitization against methacrylates.<o:p></o:p>
<p class="MsoNormal" style="margin-top:0in;margin-right:.25pt;margin-bottom:0in;
margin-left:.25in;margin-bottom:.0001pt;text-align:justify;text-indent:-.25in;
line-height:normal;mso-list:l1 level1 lfo2;tab-stops:list .25in">· 
Commercial medical gloves do not
protect against the sensitizing effect of methacrylates.<o:p></o:p>

Harvard Self-Bond 5ml = 8.5g  7TH BONDING SYSTEM

<ul><li>Harvard Self-Bond is a simple to use. </li><li>self-etching light curing </li><li>one component adhesive. </li><li>It ensures a strong bonding of composites to enamel and dentin.<o:p></o:p></li><li>No extra etching necessary</li><li>Only one layer necessary</li><li>Easy application</li><li>Hydrophilic for wet-bonding technique</li>Indications<o:p></o:p>Harvard Self-Bond is designed for bonding of light cure composites to enamel and dentin<o:p></o:p> Application1. Cavity preparationAfter isolation (best with a rubber dam) prepare the cavity with minimal tooth reduction.<o:p></o:p>Margins should have a slight (0.5-1.0 mm) bevel placed in the enamel to increase the surface area for greater bond strength.<o:p></o:p><o:p> </o:p>2. Pulp protection<o:p></o:p>Cavity floor of deep excavations should be covered with a thin layer of calciumhydroxide material (e.g. Harvard CalciumHydroxide).<o:p></o:p><o:p> </o:p>3. Application of Harvard Self-Bond<o:p></o:p>Apply Harvard Self-Bond with a brush onto the slightly moist enamel and dentin surfaces for 30 seconds with agitation.<o:p></o:p><o:p> </o:p>The material should build a homogeneous layer. Air thin gently for 10 seconds to remove the volatile components and to disperse the adhesive. Then light cure with a suitable dental light unit for 20 seconds before placement of a composite.<o:p></o:p><h6 style="font-family: Arial, Helvetica, Verdana, Tahoma, sans-serif;">4. PLACEMENT OF THE RESTORATIVE<o:p></o:p></h6>Apply the restorative material according to the instructions of the manufacturer.<o:p></o:p>Best results are obtained with application of a thin layer of a light cure flowable composite (e.g. Harvard RestoreFlow) followed by the application of a moldable composite (e.g. Harvard Restore) according to the instructions.<o:p></o:p><o:p> </o:p>5. Warnings<o:p></o:p>· Avoid contact with skin, mucous membrane and eyes.<o:p></o:p><p class="MsoNormal" style="margin: 0in 0in 0.0001pt 0.25in; line-height: normal; text-align: justify; text-indent: -0.25in;" rel="margin: 0in 0in 0.0001pt 0.25in; line-height: normal; text-align: justify; text-indent: -0.25in;">· Unpolymerized Harvard Self-Bond may have an irritant effect and can lead to sensitization against methacrylates.<o:p></o:p><p class="MsoNormal" style="margin: 0in 0.25pt 0.0001pt 0.25in; line-height: normal; text-align: justify; text-indent: -0.25in;" rel="margin: 0in 0.25pt 0.0001pt 0.25in; line-height: normal; text-align: justify; text-indent: -0.25in;">· Commercial medical gloves do not protect against the sensitizing effect of methacrylates.<o:p></o:p><li>Self-etch, light cure bonding</li><li><img src="https://d1x0v0tfzzbggv.cloudfront.net/images/companies/18/self%20bond.png?1572865656701"></li></ul>

<ul style="margin-top:0px;margin-bottom:10px;color:rgb(92,94,98);font-family:Roboto, 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:14px;background-color:rgb(255,255,255);"><li>Esthetic and natural translucency</li><li>Reduced solubility</li><li>Packs well & easy to handle</li><li>Easy to polish</li><li>Final finish after just 6 minutes</li><li>High fluoride release, biocompatible & radiopaque</li><li>OptiCaps® mixing time: 10 sec</li><li>Working time: 90 sec (1:30 min)*</li><li><img src="https://d1x0v0tfzzbggv.cloudfront.net/images/companies/18/Harvard%20Ionoglas%20Fill%20Extra_1.jpg?1572861383810"></li></ul>
<img src="https://d1x0v0tfzzbggv.cloudfront.net/images/companies/18/Harvard%20Ionoglas%20Fill%20Extra_2.jpg?1572861293752" "="">

Harvard Ionoglas Fill Extra

Esthetic conventional Glass Ionomer Cement for restorations, self cure. 
<img src="https://d1x0v0tfzzbggv.cloudfront.net/images/companies/18/Harvard%20Ionoglas%20Fill%20Extra.jpg?1572861121758">

Creation For Medical Uniform

Material : Polyester 100%
Color : Blue
2 Pockets on the top 
4 pockets on the pants

Female Scrub Blue

The Material used is manufactured specially to Creation , Which is smooth and comfortable with fixed color and size after frequent washes

Material : Polyester 100 %
Color : Dark Blue
3 Pocket on the Top
5 Pocket on the Pants

Male Scrub Dark Blue

Material : Polyester 
Color : White 
 3 Large Pocket
1 Small Pocket

Female Dental Lab Coat

Material : Polyester 100%
Color : White
3 Large Pocket 
1 Small Pocket

Male Dental Lab Coat

Material : Polyester 100%
Color : White 
3 Large Pocket 
1 Small Pocket

Male Long Lab Coat

Material : Polyester 100 %
Color : Blue
3 Pocket on the Top
5 Pocket on the Pants