Nile Dental

egypt

Egypt

Self etching fluoride releasing pit &amp; fissure sealant
This fissure sealant is simple and gentle on the tooth substance and consists of the BeautiSealant primer and the BeautiSealant paste. The self etching primer shortens the conventional treatment time by eliminating the treatment steps of etching and rinsing.
The treatment is gentle, as the demineralised and dehydrated Effect of the phosphoric acid etching on healthy tooth substance is avoided.
<ul>
<li>BeautiSealant achieves a sheer bond strength of 19.5 MPa, which is comparable or even better than fissure sealing with phosphoric etching.</li>
<li>The BeautiSealant paste continuously releases fluoride.</li>
</ul>
Secure Seal The paste has an optimal flow and bubble free consistency and is easy to apply, hence completely filling and permanently sealing gaps and voids. A specially developed ultra fine 27 gauge cannula (ø 0.4 mm) for precise application is part of the set.
Benefits
<ul>
<li>Ideal handling and viscosity</li>
<li>Eliminate trapped air due to bubble free consistancy</li>
<li>Radiopacity equal to dentine: 0.92 mm Al</li>
<li>High shear bond strength without etch and rinse technique</li>
<li>Application in four easy steps within 30 seconds</li>
</ul>
Indications Preventive pit and fissure sealant of deciduous and permanent teeth
PACK: 1.2 g paste

Shofu BeautiSealant 1.2g

A new generation of fluorescent, light cure resin stains formulated for individual characterization, shade modification of indirect composite resin restorations, artificial teeth and acrylic denture base resins.
Features
<ul><li>Available in a total of 15 colours (3 Primary & 12 Premixed colours) that can be used on their own,or intermixed to attain the desired shade and closely mimic natural tooth colouration.</li><li>Formulated with novel multifunctional monomers and photo initiators, these stains are stable,easy to apply in thin, even layers and attain a higher degree of surface cure.</li><li>Comes with a Clear Liquid diluent that can be used to modify the viscosity and the intensity of stains</li></ul>

LITE ART Clear Liquid 6 ml - SHOFU

DentaCarts

<ul><li>Provides pinpoint precision</li><li>Narrow cannula accurately delivers materials</li><li>22 ga cannula</li><li>Single-use only</li></ul>

Ultradent Black Micro Tip Refill

Elwan Dental Supplies

<ul><li>Precise, controlled delivery of aqueous materials</li><li>Tight, adjustable brush fibers minimize bubbles</li><li>Unique to Ultradent</li><li>Single-use only</li></ul>

Ultradent Black Mini Brush Tip

<ul><li>Provides pinpoint precision</li><li>Narrow cannula accurately delivers material</li><li>25 ga cannula</li><li>Single-use only</li></ul>

Ultradent Blue Micro Tip

<h1>4 Syringes Beautifil 2LS 4 gm each (2 A2 plus 2 A3) plus 1 syringe Beautifil Flow Plus F03 2.2 gm plus Beautibond Universal 6 ml bottle BEAUTIFIL II LS - SHOFU</h1>
Indicated for all classes of restorations, I-V, Beautifil II LS is a firm but easy handling, stackable, non-sticky universal composite that has been formulated to minimize polymerization shrinkage and resultant shrinkage stress. With superior durability and aesthetics, ideal for both anterior and posterior restorations, Beautifil II LS, delivers predictable clinical efficacy and maximum performance characteristics.
<ul>
<li>Award-winning handling – stackable and non-sticky</li>
<li>Polishes in an instant</li>
<li>Sustained fluoride release/recharge with bioactive Giomer technology</li>
<li>Great strength and high wear resistance</li>
<li>Tooth-like aesthetics with natural fluorescence and chameleon effect</li>
<li>Low volumetric shrinkage (0.85%) and shrinkage stress (2.72 MPa)</li>
</ul>

<h1>BEAUTIFIL FLOW PLUS F03 - SHOFU</h1>
Injectable anterior and posterior filling composite
Beautifil Flow Plus combines the application properties of a flow with the stability, durability and aesthetic of packable composites. It is approved for every classification – including occlusal surfaces and proximal margins. With improved handling properties allowing an injectable application, creating posterior restorations has never been easier. Moreover, the ability of Beautifil Flow Plus to release and recharge fluoride and it’s resistance to bacterial colonisation makes it ideal for the prevention of secondary caries.
Beautifil Flow Plus is available in two viscosities, ”F00“ is extremely stable and ”F03“ is moderately flowable.
Both are suited to the known flow indications, but as well to the occlusion-bearing areas which means they can also be used for class I and II fillings.
With the 360º rotary finger grip and a replaceable fine cannula the Flow Plus composites are easily applied directly out of the syringes.
A wide range of colours and various opacities are available for aesthetic restorations in single and multi shade technique.
Benefits
<ul>
<li>Restorations of Class I – V cavities</li>
<li>High tensile and flexural strength</li>
<li>”Cone technique“ application</li>
<li>Natural aesthetics with chameleon effect</li>
<li>Sustainable fluoride release and recharge</li>
<li>Exceptional radiopacity</li>
</ul>
Indications
<ul>
<li>F00 – Zero Flow: Shaping of occlusal anatomy, marginal ridges and intricate surface details, restorations of all cavity classes</li>
<li>F03 – Low Flow: Restoration of pits, gingival boxes for surface modification; serves as a baseline</li>
</ul>
<h1>BeautiBond Universal</h1>
Multifunctional Light-Cured Bonding System
Thanks to its special composition, this universal adhesive system combines superior bond strength and easy handling with high versatility. It is indicated for direct composite restorations, intraoral repairs and composite core build-ups, and also for the permanent cementation of indirect restorations including veneers.
BeautiBond Universal is a single-component adhesive allowing you to etch, prime and bond in one step. The filler and HEMA-free formulation facilitates water removal, forms an adhesive film only 5 µm in thickness (making it suitable for anterior restorations), and ensures excellent adhesion to enamel and dentin, composites, zirconia and alumina ceramics, and both precious and nonprecious alloys.
Two accessories complete the system: BeautiBond Universal DC Activator for the pretreatment of resin cements and resin build-up materials and the activation of dual curing; and BeautiBond Universal CR Enhancer for the priming of silicate glass and lithium silicate glass ceramics and cured composites.
Indications
<ul>
<li>Direct restorations with light-cured composites</li>
<li>Intraoral repair of fractured restorations with light-cured composites</li>
<li>Core build-ups with light or dual-cured resin materials</li>
<li>Cementation of indirect restorations with light or dual-cured resin cements</li>
</ul>
Benefits
<ul>
<li>High bond strengths to enamel and dentin</li>
<li>Minimised technique sensitivity thanks to filler and HEMA-free formulation</li>
<li>Thin adhesive film (5 µm) for aesthetic restorations with invisible margin lines</li>
<li>Universal adhesive system suitable for use with resin cements and resin build-up materials.</li>
</ul>

shofu offer

pre-order shofu offer: 4 Syringes Beautifil 2LS 4 gm each (2 A2 + 2 A3) + 1 syringe Beautifil Flow Plus F03 2.2 gm + Beautibond Universal 6 ml bottle

Fluoride varnish for the treatment of dental hypersensitivity

<ul><li>Immediately desensitising</li><li>Formation of a protective coat against thermal and mechanical influences</li><li>Transparent – no discolouration of teeth</li><li>Special varnish base reinforces long-term effect and deep fluoridation</li><li>Economical and simple – high yield, low cost, fast application</li><li>Dries quickly</li><li>Colophony-free</li><li>Contains 5 % sodium fluoride (equal to 22,600 ppm fluoride) and 5 % calcium fluoride</li></ul>
<h2>Indications</h2>
<ul><li>Treatment of hypersensitivity, including</li></ul>
<ol><li>cervical area and crown margins</li><li>sensitivity after professional cleaning and calculus removal</li><li>tooth surfaces after preparation and / or grinding</li><li>worn occlusal surfaces and teeth carrying clasps</li><li>after injury of the enamel (e.g. fractures, chips)</li><li>sealing cavity margins after restoration, especially after the etching technique has been employed</li><li>as a dentine protection / lining under amalgam fillings</li></ol>

Bifluorid 10 - SingleDose

Dental Smile.

FISSURED NOVA PLUS Is high filled and light-curing, fissure sealant with high fluoride continuous release
<ul>
<li>Optimum flow properties for high penetration.</li>
<li>High and long time fluoride release.</li>
<li>High stability and perfect adhesion to enamel.</li>
<li>Effective protection against caries</li>
<li>Bacteriostatic effect</li>
<li>High (50%, 55%) inorganic filler selections for outstanding abrasion proofness</li>
<li>White colour selection for easy visual control and transparent colour selection</li>
<li>Some packings contains coloured etching gel</li>
<li>Elastic using tips</li>
<li>Sealing of fissures, pits</li>
</ul>
INDICATIONS:
<ul>
<li>Sealing of fissures, pits and occlusal surfaces for caries</li>
<li>Sealing of extended fissures</li>
<li>Filling of small cavities</li>
</ul>
Package : 2 Syringe

​FISSURED NOVA PLUS Is high filled and light-curing, fissure sealant with high fluoride continuous release

Nova Pits and Fissures Sealant

POLIMO FLUORIDE VARNISH is a flavored, xylitol-sweetened, 5% sodium fluoride dental varnish.
<ul>
<li>Superior fluoride release, contains 22600 ppm fluoride</li>
<li>Smooth, non-gritty texture</li>
<li>Invisible appearance</li>
<li>Different flavor selections</li>
<li>Optimum flowability ensures reaches every area of the teeth .</li>
<li>Treatment of hypersensitive teeth</li>
<li> Improvement of enamel resistance against acid</li>
<li>Treatment of possible sensitivity after tooth whitening</li>
<li>Treatments of exposed dentin and root surface sensitivity</li>
</ul>
Nova florid  varnish single dose   Expiry Date   30/06/2023

POLIMO FLUORIDE VARNISH is a flavored, xylitol-sweetened, 5% sodium fluoride dental varnish.

Nova Florida Varnish single Dose

ZT Dental Dam Stabilizing Cord

Shefaa

Gel promoting complete polymerisation of dental composites.
INOX protects the surface of composites by blocking oxygen access during the light-curing process. In this way, an inhibition layer does not form on the composite surface, so that the polymerization process is not inhibited and can proceed properly.
INOX Gel is intended for use during: – polymerisation process of light-hardened composites;; – prosthetic treatments performed with the use of dental cement (i.e. placing veneers, inlays, onlays), in order to promote complete polymerisation of composites.
INOX can also be used as a try-in gel for cementing of prosthetic works.
<h2>Ingredients:</h2>
<ul>
<li>propanotriol (glycerol), Ph Eur purified water, gel base</li>
</ul>
<h2>Available packages:</h2>
<ul>
<li>syringe of 2 ml + set of disposable applicators</li>
</ul>
<h2>Properties of INOX</h2>
INOX Gel makes the polymerized composite:
• HARDER – fully polymerized • SMOOTHER – better prepared for finishing • MORE DURABLE – more scratch- and abrasion-resistant • MORE AESTHETIC – less susceptible to discoloration
The light of a polymerisation lamp penetrates through the gel layer. The product is easily washed out with water.
Polymerisation of light-cured composites: 1. Apply and form the last composite coat , apply INOX Gel without touching the composite coat with the applicator. The gel layer must tightly cover the whole surface of the dental restoration and stay in place during the polymerisation process . 2. Light cure through the gel coat . 3. Wash out INOX Gel after the polymerisation process has been finished . 4. Trim and polish the composite surface as needed.
During seating of prosthetic works with resin cement: 1. When the restoration has been seated, remove excess resin cement as needed. 2. Apply the INOX Gel on the marginal area of the restoration (veneer, inlay, onlay) without touching the composite coat with the applicator. The gel layer must tightly cover the whole surface of the dental restoration and stay in place during the polymerisation process . 3. Light cure through the gel coat . 4. Wash out INOX Gel after the polymerisation process has been finished . 5. Trim and polish the composite surface as needed.

Gel promoting complete polymerization of dental composites.

INOX protects the surface of composites by blocking oxygen access during the light-curing process. In this way, an inhibition layer does not form on the composite surface, so that the polymeri

Cerkamed INOX Oxygen Inhibitor - 2ml syringe

ARK Medical

ARK Medical Industries :- (Expertly innovative products)
With 16 years of experience in manufacturing the medical gels and ECG/ECC Electrodes for the local market and exporting to the European Union ,4 years ago in the field of dentistry, we introduced the brand Astra Medical and now we introduce the brand ARK.
<h5>ARK Hemo Stop Gel - 25% Aluminium Chloride Gel:</h5>
 PRODUCT BENEFITS:
• Non staining unlike ferric sulphate which stains porcelain, Veneers and crowns. • Does not discolor the gingiva. • Places easily, comes as a viscous yet spreadable gel • Does not impede hard or soft tissue healing. • Effectively stops minor gingival bleeding • Eliminates sulcular fluid contamination for optimal bonding • Facilitates great control in esthetic zone with no gingival stain. • The clear gel allows easy visibility and rinses away quickly. • No coagulum is formed, nor does residue adhere to the preparation, which is especially critical in the esthetic zone. • Stops bleeding in seconds, saving chair time • ARK Hemo Stop Gel Clear hemostatic will not stain the hard or soft tissues. • Stable and long shelf life, Pleasantly flavored. • Does not interfere with bonding. 
- Direction for use: Remove the cap from syringe and fix applicator tip. Apply a sufficient amount of gel directly into the sulcus, carefully following the contour of the prepared tooth, Leave in place for 2 minutes. In case bleeding persists, wash off the gel and re-apply and wait for 2 minutes. Rinse gently, dry and take the impression. For Sulcus retraction, the gel impregnated retraction cord should be carefully placed stepwise in the gingival sulcus with the help of a cord.
************************************************************************************

ARK Hemo Stop Gel - 25% Aluminium Chloride Gel:
 PRODUCT BENEFITS:

• Non staining unlike ferric sulphate which stains porcelain, Veneers and crowns.
• Does not discolor the gingival.
• Places easily, Comes as a viscous yet spreadable gel
• Does not