B Dent

egypt

Egypt

Total-Etch Adhesive
Bottle 5ml
Made in switzerland

Coltène One Coat Bond SL (5ml)

Dental Smile.

Porcelain Etch Gel 10% hydrofluoric acid gel conditions porcelain or ceramic surfaces prior to bonding. Used prior to Prime-Dent® porcelain bond enhancer.

Porcelain Etch Gel 10% hydrofluoric acid gel conditions porcelain or ceramic surfaces prior to bonding. Buy now from DentaCarts.

Prime-Dent, Porcelain Etch Gel Syringe, 3g Syringe

DentaCarts

<h2>37.5% Phosphoric Acid Gel</h2>
Kerr's distinctive purple-colored 37.5% phosphoric acid gel is designed for maximum etching efficiency. Its perfect viscosity allows the material to stay where it is placed, yet can be rinsed off easily.
<h3>Features You Can Depend on</h3>
<ul>
<li>Perfect viscosity - stays where you place it</li>
<li>No separation - delivery is always clean and easy</li>
<li>Vibrant purple color - highly visible</li>
<li>Rinses clean with minimum effort, easy to use</li>
</ul>

Kerr Etchant Gel

Dental Town

DENU Etch 37 (Semi Gel Type Etching Agent with Phosphoric Acid) 
Features: - Optimal viscosity for precise placement and excellent control - Excellent etching of dentin and enamel - Provides excellent etching depth - Perfect removal and no debris left after etching - No leak from the syringe after use Applications: - Etching for bonding composites, sealants or adhesives.

​Features:
- Optimal viscosity for precise placement and excellent control
- Excellent etching of dentin and enamel
- Provides excellent etching depth
- Perfect removal and no debris left after etching
- No leak from the syringe after use
Applicatio

Denu Etch 3ml

CompoB Plus is a light-cure ethanol/water-based, self-etching, one-step, all in one bonding agent. It can be used reliably in total-etch, self-etch or selective-etch mode for both direct and indirect restorations.
<ul>
<li>The mild acidty so leaves denting tubuli closed to eliminate the postoperative sensitivity.</li>
<li>Minimal technique sensitivity and is indicated for light-cure composites, root surface treatment and cavity sealing.</li>
<li>No mixing and etching, priming and bonding are captured in one material</li>
<li>Highest bonding strengths to both dentin and enamel for seventh-generation,</li>
<li>Contains 2 functional monomers to form a better double chemical adhesion.</li>
<li>MOP monomer optimizes self-etch performance, increases shelf stability and provides durability of adhesion. 4-META monomer enhances dentin bond strength.</li>
</ul>
 
The MDP Monomer Provides
<ul>
<li>Better adhesion performance to enamel</li>
<li>Increases self etching feature </li>
<li>Greater product stability</li>
<li>High adhesion strength for metal and non-glass ceramic substrates</li>
<li>Provides durability of adhesion; strong bond to apatite surfaces by formation of non-soluble Ca+2 salts</li>
</ul>
 
Carboxylated dimethacylate monomer advantages
<ul>
<li>Dentin bond strength</li>
<li>Reacts with apatite</li>
<li>Improves the bond performance under variable humidity conditions and deep dentin</li>
</ul>
Indications:
<ul>
<li>Direct placing light–curing composite or compomer filling materials</li>
<li>Bonding of core build–ups made of light–curing composite or core build–up materials</li>
<li>Repair of composite or compomer fillings</li>
<li>Adhesive cementation of indirect restorations with light– and dual–curing luting composites</li>
<li>Sealing of prepared tooth surfaces before temporary / permanent cementation of indirect restorations</li>
<li>Root surface desensitization, dentine protector properties</li>
<li>Bonding of fissure sealants</li>
<li>Intraoral repair of composite restorations, porcelain fused to metal, and all–ceramic restorations without extra primer</li>
<li>Protective varnish for glass ionomer fillings</li>
</ul>

​CompoB Plus is a light-cure ethanol/water-based, self-etching, one-step, all in one bonding agent. It can be used reliably in total-etch, self-etch or selective-etch mode for both direct and indirect restorations.​

Nova Compo B Plus Bond

One-component light-curing nano-reinforced self-etch bond
<ul>
<li>No postoperative sensitivities</li>
<li>High bond strengths on enamel and dentine</li>
<li>No shaking, no massaging</li>
<li>Tolerates moisture</li>
<li>10 seconds light curing</li>
<li>self etch</li>
</ul>
<h2>Indications</h2>
Bondfix is suited for direct restorations using light-curing filling materials in all cavity classes.

Voco Bondfix - 2 ml bottle

BISCO’s porcelain primers are silane coupling agents used to improve bonding between porcelain restorations and resin cements. It also protects porcelain restorations from contamination, increases mechanical and chemical bonding of resin to the porcelain, and yields greater resistance to water leakage at the bonding interface.

BISCO’s porcelain primers are silane coupling agents used to improve bonding between porcelain restorations and resin cements. It also protects porcelain restorations from contamination, increases mechanical and chemical bonding of resin to the porcelain,

Bisco Porcelain Primer

BISCO’s porcelain primers are silane coupling agents used to improve bonding between porcelain restorations and resin cements. It also protects porcelain restorations from contamination, increases mechanical and chemical bonding of resin to the porcelain, and yields greater resistance to water leakage at the bonding interface.
BISCO PORCELAIN ETCHANT 9.5% Buffered Hydrofluoric Acid Gel 5Gx1 Syringe
Product Description
The gel containing 9.5% hydrofluoric acid is mainly used for acid etching porcelain, and the bonding strength between porcelain and composite resin is increased by increasing the surface area of porcelain and improving the chemical properties of porcelain surface.

BISCO’s porcelain primers are used to improve bonding between porcelain substrates and resin cements.

Porcelain Primer
A single component pre-hydrolyzed no-mix silane prim

Bisco Porcelain Etch

Shefaa

Gel promoting complete polymerisation of dental composites.
INOX protects the surface of composites by blocking oxygen access during the light-curing process. In this way, an inhibition layer does not form on the composite surface, so that the polymerization process is not inhibited and can proceed properly.
INOX Gel is intended for use during: – polymerisation process of light-hardened composites;; – prosthetic treatments performed with the use of dental cement (i.e. placing veneers, inlays, onlays), in order to promote complete polymerisation of composites.
INOX can also be used as a try-in gel for cementing of prosthetic works.
<h2>Ingredients:</h2>
<ul>
<li>propanotriol (glycerol), Ph Eur purified water, gel base</li>
</ul>
<h2>Available packages:</h2>
<ul>
<li>syringe of 2 ml + set of disposable applicators</li>
</ul>
<h2>Properties of INOX</h2>
INOX Gel makes the polymerized composite:
• HARDER – fully polymerized • SMOOTHER – better prepared for finishing • MORE DURABLE – more scratch- and abrasion-resistant • MORE AESTHETIC – less susceptible to discoloration
The light of a polymerisation lamp penetrates through the gel layer. The product is easily washed out with water.
Polymerisation of light-cured composites: 1. Apply and form the last composite coat , apply INOX Gel without touching the composite coat with the applicator. The gel layer must tightly cover the whole surface of the dental restoration and stay in place during the polymerisation process . 2. Light cure through the gel coat . 3. Wash out INOX Gel after the polymerisation process has been finished . 4. Trim and polish the composite surface as needed.
During seating of prosthetic works with resin cement: 1. When the restoration has been seated, remove excess resin cement as needed. 2. Apply the INOX Gel on the marginal area of the restoration (veneer, inlay, onlay) without touching the composite coat with the applicator. The gel layer must tightly cover the whole surface of the dental restoration and stay in place during the polymerisation process . 3. Light cure through the gel coat . 4. Wash out INOX Gel after the polymerisation process has been finished . 5. Trim and polish the composite surface as needed.

Gel promoting complete polymerization of dental composites.

INOX protects the surface of composites by blocking oxygen access during the light-curing process. In this way, an inhibition layer does not form on the composite surface, so that the polymeri

Cerkamed INOX Oxygen Inhibitor - 2ml syringe

Collection For Import & Export

<h1>i-GEL N</h1>
<h3>Phosphoric Acid Etching Gel And Liquid</h3>
<h3>INDICATIONS</h3>
<ul><li>For etching teeth and preparing surfaces</li></ul>
<h3>ADVANTAGES</h3>
<ul><li>Optimum level of viscosity</li><li>37% phosphoric acid</li><li>Removes smear layer and opens dentinal tubule orifices</li></ul>

i-GEL N
Phosphoric Acid Etching Gel And Liquid​
INDICATIONS
For etching teeth and preparing surfaces
ADVANTAGES
Optimum level of viscosity
37% phosphoric acid
Removes smear layer and opens dentinal tubule orifices
​

i-Dental i-GEL N Acid Etch Phosphoric Acid Etching Gel And Liquid

<a href="https://www.ultradent.com/products/categories/orthodontics/adhesives/etchants/porcelain-etch-silane" target="_blank"><img src="https://dentacarts.com/images/companies/61/000%20official-site.jpg?1650311983427"></a> 
(Hydrofluoric Acid) Porcelain Etch &&nbsp; Silane coupling agents
Made in USA
1.2ml Etch & 1.2ml Silane
 

Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1&nbsp; Both Porcelain Etch and Silane may be used intraorally or extraorally.
<ul><li>Porcelain Etch is a viscous, buffered 9% hydrofluoric acid</li><li>Etch is easy to control and place</li><li>Will not stain composite or resin cement</li><li>Silane is a single-component solution</li><li>Yields highest porcelain-to-resin bond strengths1</li><li>Porcelain Etch and Silane may also be used on lithium disilicate (IPS e.max®2&nbsp;) restorations</li><li>Certified gluten free</li></ul>

Ultradent™ Porcelain Etch and Silane Mini Kit(1.2ml&1.2ml)

<a href="https://www.ultradent.com/products/categories/orthodontics/adhesives/etchants/porcelain-etch-silane" target="_blank"><img src="https://dentacarts.com/images/companies/61/000%20official-site.jpg?1650312351099"></a>
(Hydrofluoric Acid) Porcelain Etch
Made in USA
Syringe 1.2ml

Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1&nbsp; Both Porcelain Etch and Silane may be used intraorally or extraorally.
<ul><li>Porcelain Etch is a viscous, buffered 9% hydrofluoric acid</li><li>Etch is easy to control and place</li><li>Will not stain composite or resin cement</li><li>Silane is a single-component solution</li><li>Yields highest porcelain-to-resin bond strengths1</li><li>Porcelain Etch and Silane may also be used on lithium disilicate (IPS e.max®2&nbsp;) restorations</li><li>Certified gluten free</li></ul>